|
|
|
|
|
 |
|
|
|
|
ENERGY AND HEAT TRANSFER ENGINEERING
|
|
DIN 1942
|
Acceptance testing of steam generators (VDI Code of practice)
|
|
DIN 1943
|
Thermal acceptance tests of steam turbines
|
|
DIN 1947
|
Thermal performance acceptance testing of water cooling towers; DIN(VDI Code of practice)1947
|
|
DIN 19752
|
Hydroelectric power plants; rules for planning and operation
|
|
DIN 25427-1
|
Design of Gas-filled Double-bend Ducts in Concrete Shields against Gamma Radiation; Terms and Conditions
|
|
DIN 28187
|
Tubular heat exchangers; connections tube to tube sheet
|
|
DIN 4140
|
Thermal insulation of industrial and domestic service installations and equipment
|
|
DIN 4312
|
Industrial-type turbines; steam turbines and gas expansion turbines; construction principles for industrial-type turbines
|
|
DIN 4754
|
Heat transfer installations working with organic heat transfer fluids - Safety requirements, test
|
|
DIN 4757-2
|
Solar heating plants operating on organic heat transfer media; Requirements relating to safe design and construction
|
|
DIN 4787-1
|
Atomizing oil burners; Concepts, safety requirements, testing, marking
|
|
DIN 4788-1
|
Gas Burners; Gas Burners without Blowers
|
|
DIN 52613
|
Thermal Insulation Testings; Determination of Thermal Conductivity by the Tube Method
|
|
DIN 6281
|
Generator Sets with Reciprocating Internal Combustion Engines; Connection Dimensions for Generators and Reciprocating Internal Combustion Engines
|
|
DIN EN 10090
|
Valve steels and alloys for internal combustion engines
|
|
DIN EN 1048
|
Heat exchangers - Air cooled liquid coolers ('dry coolers') - Test procedure for establishing the performance
|
|
DIN EN 12178
|
Refrigerating systems and heat pumps - Liquid level indicating devices - Requirements, testing and marking
|
|
DIN EN 12263
|
Refrigerating systems and heat pumps - Safety switching devices for limiting the pressure - Requirements and tests
|
|
DIN EN 125
|
Flame supervision devices for gas-burning appliances - Thermo-electric types
|
|
DIN EN 12514-1
|
Installations for oil supply systems for oil burners - Part 1: Safety requirements and tests; Parts, oil feed pumps, control and safety devices, supply tanks; English version of DIN EN 12514-1
|
|
DIN EN 12514-2
|
Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests; Parts, valves pipes, filters, oil de-aerators, meters; English version of DIN EN 12514-2
|
|
DIN EN 12601
|
Reciprocating internal combustion engine driven generating sets - Safety; English version of DIN EN 12601
|
|
DIN EN 12952 Beiblatt 1
|
Water-tube boilers and auxiliary installations - Part 17: Guidelines for the involvement of an inspection body independent of the manufacturer
|
|
DIN EN 12952-1
|
Water-tube boilers and auxiliary installations - Part 1: General; Eanglish version of DIN EN 12952-1
|
|
DIN EN 12952-13
|
Water-tube boilers and auxiliary installations - Part 13: Requirements for flue gas cleaning systems
|
|
DIN EN 12952-14
|
Water-tube boilers and auxiliary installations - Part 14: Requirements for fluegas DENOX systems using liquified pressurized ammonia and ammonia water solution
|
|
DIN EN 12952-15
|
Water tube boilers and auxiliary installations - Part 15: Acceptance tests
|
|
DIN EN 12952-16
|
Water-tube boilers and auxiliary installations - Part 16: Requirements for grate and fluidized-bed firing systems for solid fuels for the boiler
|
|
DIN EN 12952-2
|
Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories; English version of DIN EN 12952-2
|
|
DIN EN 12952-3
|
Water tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts; English version of DIN EN 12952-3
|
|
DIN EN 12952-4
|
Water-tube boilers and auxiliary installations - Part 4: In-service boiler life expectancy calculations; English version of DIN EN 12952-4
|
|
DIN EN 12952-5
|
Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler
|
|
DIN EN 12952-6
|
Water-tube boilers and auxiliary installations - Part 6: Inspection during construction, documentation and marking of pressure parts of the boiler
|
|
DIN EN 12952-7
|
Water tube boilers and auxiliary installations - Part 7: Requirements for equipment for the boiler
|
|
DIN EN 12952-8
|
Water-tube boilers and auxiliary installations - Part 8: Requirements for firing systems for liquid and gaseous fuels for the boiler
|
|
DIN EN 12952-9
|
Water-tube boilers and auxiliary installations - Part 9: Requirements for firing systems for pulverized solid fuels for the boiler
|
|
DIN EN 12953 Beiblatt 1
|
Shell boilers - Part 14: Guideline for the involvement of an inspection body independent of the manufacturer
|
|
DIN EN 12953-1
|
Shell boilers - Part 1: General
|
|
DIN EN 12953-11
|
Shell boilers - Part 11: Acceptance tests
|
|
DIN EN 12953-12
|
Shell boilers - Part 12: Requirements for grate firing systems for solid fuels for the boiler
|
|
DIN EN 12953-2
|
Shell boilers - Part 2: Materials for pressure parts of boilers and accessories
|
|
DIN EN 12953-3
|
Shell boilers - Part 3: Design and calculation for pressure parts
|
|
DIN EN 12953-4
|
Shell boilers - Part 4: Workmanship and construction of pressure parts of the boiler
|
|
DIN EN 12953-5
|
Shell boilers - Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler
|
|
DIN EN 12953-6
|
Shell boilers - Part 6: Requirements for equipment for the boiler
|
|
DIN EN 12953-7
|
Shell boilers - Part 7: Requirements for firing systems for liquid and gaseous fuels for the boiler
|
|
DIN EN 12953-8
|
Shell boilers - Part 8: Requirements for safeguards against excessive pressure; English version of DIN EN 12953-8
|
|
DIN EN 12975-1
|
Thermal solar systems and components - Collectors - Part 1: General requirements; English version of DIN EN 12975-1
|
|
DIN EN 12976-1
|
Thermal solar systems and components - Factory made systems - Part 1: General requirements; English version of DIN EN 12976-1
|
|
DIN EN 12976-2
|
Thermal solar systems and components - Factory-made systems - Part 2: Test methods; English version of DIN EN 12976-2
|
|
DIN EN 13136
|
Refrigerating systems and heat pumps - Pressure-relief devices and their associated piping - Methods for calculation; English version of DIN EN 13136
|
|
DIN EN 13215
|
Condensing units for refrigeration - Rating conditions, tolerances and presentation of manufacturer's performance data; English version of DIN EN 13215
|
|
DIN EN 13313
|
Refrigerating systems and heat pumps - Competence of personnel; English version of DIN EN 13313
|
|
DIN EN 1397
|
Heat exchangers - Hydronic room fan coil units - Test procedures for establishing the performance
|
|
DIN EN 14222
|
Stainless steel shell boilers
|
|
DIN EN 1679-1
|
Reciprocating internal combustion engines - Safety - Part 1: Compression ignition engines
|
|
DIN EN 1736
|
Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators and expansion joints - Requirements, design and installation; English version of DIN EN 1736
|
|
DIN EN 255-3
|
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 3: Testing and requirements for marking for sanitary hot water units (including Corrigendum AC:1997)
|
|
DIN EN 257
|
Mechanical thermostats for gas-burning appliances
|
|
DIN EN 264
|
Safety shut-off devices for combustion plants using liquid fuels; safety requirements and testing
|
|
DIN EN 293
|
Oil pressure atomizing nozzles; minimum requirements, testing
|
|
DIN EN 299
|
Oil pressure atomizing nozzles - Determination of the angle and spray characteristics
|
|
DIN EN 306
|
Heat exchangers - Methods of measuring the parameters necessary for establishing the performance
|
|
DIN EN 307
|
Heat exchangers - Guidelines to prepare installation, operating and maintenance instructions required to maintain the performance of each type of heat exchangers
|
|
DIN EN 308
|
Heat exchangers - Test procedures for establishing performance of air to air and flue gases heat recovery devices
|
|
DIN EN 378-2
|
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation; English version of DIN EN 378-2
|
|
DIN EN 378-3
|
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection; English version of DIN EN 378-3
|
|
DIN EN 378-4
|
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4: Operation, maintenance, repair and recovery; English version of DIN EN 378-4
|
|
DIN EN 45510-1
|
Guide for procurement of power station equipment - Part 1: Common clauses
|
|
DIN EN 45510-2-2
|
Guide for procurement of power station equipment - Part 2-2: Electrical equipment - Uninterruptible power supplies
|
|
DIN EN 45510-2-3
|
Guide for procurement of power station equipment - Part 2-3: Electrical equipment; Stationary batteries and chargers; English version of DIN EN 45510-2-3
|
|
DIN EN 45510-2-4
|
Guide for procurement of power station equipment - Part 2-4: Electrical equipmen; High power static convertors; English version of DIN EN 45510-2-4
|
|
DIN EN 45510-2-6
|
Guide for procurement of power station equipment - Part 2-6: Electrical equipment; Generators; English version of DIN EN 45510-2-6
|
|
DIN EN 45510-2-7
|
Guide for procurement of power station equipment - Part 2-7: Electrical equipment; Switchgear and controlgear
|
|
DIN EN 45510-3-1
|
Guide for procurement of power station equipment - Part 3-1: Boilers - Water tube boilers
|
|
DIN EN 45510-3-2
|
Guide for procurement of power station equipment - Part 3-2: Boilers - Shell boilers
|
|
DIN EN 45510-3-3
|
Guide for procurement of power station equipment - Part 3-3: Boilers - Boilers with fluidized bed firing
|
|
DIN EN 45510-4-2
|
Guide to procurement of power station equipment - Part 4-2: Boiler auxiliaries - Gas-air, steam-air and gas-gas heaters
|
|
DIN EN 45510-4-4
|
Guide for procurement of power station equipment - Part 4-4: Boiler auxiliaries; Fuel preparation equipment
|
|
DIN EN 45510-4-5
|
Guide for procurement of power station equipment - Part 4-5: Boiler auxiliaries; Coal handling and bulk storage plant
|
|
DIN EN 45510-4-7
|
Guide to procurement of power station equipment - Part 4-7: Boiler auxiliaries - Ash handling plant
|
|
DIN EN 45510-4-8
|
Guide for procurement of power station equipment - Part 4-8: Boiler auxiliaries - Dust handling plant
|
|
DIN EN 45510-4-9
|
Guide for procurement of power station equipment - Part 4-9: Boiler auxiliaries - Sootblowers
|
|
DIN EN 45510-5-1
|
Guide for procurement of power station equipment - Part 5-1: Steam turbines
|
|
DIN EN 45510-5-2
|
Guide for procurement of power station equipment - Part 5-2: Gas turbines
|
|
DIN EN 45510-5-3
|
Guide for procurement of power station equipment - Part 5-3: Wind turbines
|
|
DIN EN 45510-6-1
|
Guide for procurement of power station equipment - Part 6-1: Turbine auxiliaries - Deaerators
|
|
DIN EN 45510-6-2
|
Guide for procurement of power station equipment - Part 6-2: Turbine auxiliaries - Feedwater heaters
|
|
DIN EN 45510-6-3
|
Guide for procurement of power station equipment - Part 6-3: Turbine auxiliaries - Condenser plant
|
|
DIN EN 45510-6-6
|
Guide for procurement of power station equipment - Part 6-6 Turbine auxiliaries - Wet and wet/dry cooling towers; English version of DIN EN 45510-6-6
|
|
DIN EN 45510-6-7
|
Guide for procurement of power station equipment - Part 6-7: Turbine auxiliaries - Moisture separator reheaters
|
|
DIN EN 45510-6-8
|
Guide for procurement of power station equipment - Part 6-8: Turbine auxiliaries - Cranes; Englisch version DIN EN 45510-6-8
|
|
DIN EN 45510-6-9
|
Guide for procurement of power station equipment - Part 6-9: Turbine auxiliaries - Cooling water systems; Englisch version DIN EN 45510-6-9
|
|
DIN EN 521
|
Specification for dedicated liquefied petroleum gas appliances - Portable vapour pressure liquefied petroleum gas appliances
|
|
DIN EN ISO 3977-5
|
Gas turbines - Procurement - Part 5: Applications for petroleum and natural gas industries (ISO 3977-5:2001); German and English version EN ISO 3977-5:2003
|
|
|